Is it possible to connect multiple displays to my WPG-370?

The WPG-370 does not support connection to multiple displays.  The WPG-370 does have VGA and HDMI as video outputs, which may be used alternatively not simultaneously.

WPG-370 presentation mode setup

To stream via Presentation mode you will first need to place the WPG-360 / 370 in Presentation. Then you need to connect your PC / Mac to the WPG-360 / 370 like you would connect to any other wireless network. Now type in the link at the bottom of your wireless display in your computers web browser. You will be taken to the WPG-360 / 370 admin page. Type in your username and password and download the appropriate vs-presenter software for your system. Once the Download is complete, install the vs-presenter software onto your computer and run the vs-presenter software. Then you will need to type in your Login Code that can be found display in the upper right corner of your wireless display and click connect. You should now be shown a control panel, which you can us to share your screen or pause the image shown on the wireless display.

Why does my TD2220 randomly receive touch signal and respond accordingly while exposed to sunlight?

TD2220 is an optical touch monitor which uses two CMOS cameras (optical sensors) placed in the corners at the top of the screen as well as three reflectors (light strips). These cameras are used to look across the entire touch surface for touch events. When an object touches the screen, it blocks some of the light being received by the sensors in the cameras. The location of the touch is then calculated by using the information from both cameras and the mathematical principles of triangulation. Pros of Optical Touch Screens 1. Entire screen including the corners is sensitive to touch 2. Images are crystal clear because no coating is used on the panel 3. Panels last for a long time as only a light touch is needed to register an input 4. Support multi-touch events and gestures 5. Scales with perimeter and not area However, even with those pros, there’s also some cons. Performance may be interfered/affected by direct sunlight or reflections from wet or shiny surfaces. That’s why it’s observed to receive touch signal randomly while exposed to sunlight.

Other products Support

General Questions Troubleshooting Guide

Contact Us

Contact Us directly if you're unable to get the answers and solutions for your ViewSonic products.

Compare

Select up to 3 product to compare their specifications.

Select Your Region